Links and
Banner Exchange

Elemental Scientific

(For both Gas and Electric)


Features and Specs at a Glance...

Over two years from conception to market! We at Goldquest, LLC wanted to make sure our impact mill was state-of-the-art and something WE wanted to run for ourselves! We added features not offered on other units out there, AND we can in most cases ship in 1 to 2 weeks from ordering. Sometimes even within a couple days depending on sales at any given time.

All of our competitors state that their crusher will make powder from 100 to 300 mesh in seconds. Well so will ours IF you want that. BUT if you don't, and in many cases you will NOT want to mill it that fine!

Case in point, if you have visible gold in the 20 to 50 mesh range, would it not be nicer to liberate that gold at that size? Or would you prefer to smash that 20 to 50 mesh gold to 300 mesh so your only option is to use chemicals like cyanide to get your free milling gold?

In days gone past, the stamp mills of old knew that crushing it too fine you had to go the extra mile to get it back. If you have plainly visible gold, leave it at a manageable size to recover it in mechanical means. You can always change out the screens and run the tailings again to get the ultra fine 300 mesh. You can either crush everything down to 300 mesh, OR you can chose to have the option to crush or break down to any size you desire! Your choice.

Having the Goldquest1400 mounted on the tailgate of a truck, and having the discharge fed directly in to a gold cube will catch all that fine visible gold! Feed in a ton, take home a cup of tails. If you are a previous customer for the Crazycrusher, and if you purchased the hitch mount with it, you would be glad to know that we built the Goldquest 1400 to fit the same hitch mount as your Crazycrusher does. (Different bolts needed.)


*All-welded steel
*Feet with mounting holes
*Pre-drilled holes for mounting to optional hitch mount (same as with the Crazycrusher).
*Forged Clevis Hooks for that added hard punch
*Easily adaptable for chains if needed.
*Can easily break up clays and caliche when running values.
*Customizable output: Our removable dual grizzly output makes it possible to run any mesh of screen, double screen, or no screen, depending on how fine or coarse you need to process your ores. Screen “floats” between grizzly bars giving faster output of crushed materials.
*No tools needed to open and clean or to service
*Direct drive with solid coupler, no belts or pulleys to mess with.
*7 HP gas engine runs at up to 3500 rpm. (3600rpm with ELECTRIC MOTOR version.
*3/4” keyed drive shaft. (5/8" shaft on ELECTRIC version.
*Backplate to prevent wear on the bolt heads inside the unit.
*7 breaker bars to speed up the process of shattering rock.
*Hard 1/8” Neoprene door seal for a long lasting seal.
*Feed Door has Neoprene rubber seal to help with dust.

*Price includes shipping within the Lower 48 States. Contact us for discount shipping to Alaska, Hawaii or Canada.
*Optional hitch mount.
*Optional grizzly rock ports.
*Detatchable Feed tray and vacuum port included with either Gas or Electric mills. Perfect for those who need to reduce large rock in to smaller rock without having it “ground down to powder”, such as breaking large amounts of agate for smaller stones for polishing, or for breaking 3” rock down to ½ inch or 1 inch on average for landscaping, garden shops and greenhouses, etc.


*Side walls: ¼ inch steel.
*Door and back plate: 10 gage steel.
*Net weight: 102 lbs (with engine. 111lbs with optionial hitch mount)
*Mill Size: 14 “ (side to side) octagon at 4” depth.
*Overall Net Dimensions: L=24", W=17", H=25-1/2" (with Engine).
*Feed Size: 3 inch square tubing.
*Discharge type: Dual Grizzly with floating screen.
*Discharge port size: 2-3/4” x 4”. (without grizzly bars in place)
*Average Capacity: Average 500 lb per hour, (depending on hardness and rock size).
*Average Output size: 30 to 50 mesh with stock screen. (User can put in any sized screen they desire.)
*Breaker bars: 7 each
*Hammer type: Forged Clevis Hooks (2 each) Quick change.
(Can also use chain if desired for different matrix)

Additional information about the Electric Motor

3 HP Single Phase
Dual Capacitor start
230 VAC
3600 RPM
12.26 amps
60 hz
Continuous Duty
56 Frame
Nema L